This is the large-scale version of one our oldest and best selling NavLight Sets. The 8mm LEDS are much brighter, due in part to the fact that they use about 5 times as much current (120mA) as the smaller 5mm LEDs (25mA). Yet the total current draw of the set is still not enough to require a seperate battery, less than .75 amps with everything "on", including Landing Lights! And the 8mm LEDs feature a unique "Straw Hat" lens that speads the output of the LED in a 120 degree angle, so they are much more visible when viewed off angle, meaning they do not have to be viewed directly from the front.
Features 2 Wingtip Lights (1-Red, 1-Green), 2 White Landing Lights, and 1 Strobe (White or Red). Landing Lights can be controlled from the transmitter, and the strobe is switchable for single or double-blink mode. Unit plugs into any spare channel, or can be combined with a retract or flap servos using a regular servo "Y".
New Option: For those customers who prefer to power their NavLights from an external battery pack, we now offer an External Power Pack that can be ordered sepeartely. It includes a 2S 7.4 volt Li-Po battery and all the cables necessary to power the circuit.
DOWNLOAD: Basic NavLights (Giant Scale) Manual
Basic NavLights-8mm (Giant Scale)
All of the new 8mm NavLight Sets feature an on-board regulator, so they can be used with any receiver, any size receiver battery, including HV (high voltage) systems. No need for a seperate BEC, the circuit will accept whatever voltage you may have coming from your receiver. The larger, brighter 8mm LEDs look much more scale-like on today's larger models, and each set comes with black plastic holders for the LEDs, as well as a pair of our 6-pin connectors that can be easily installed at any place in the wiring to allow for easy removal of a wing or wing halves.
Wire lengths are 60" each for Wingtip Lights and Strobe, 30" each for Landing Lights, and all wires can be easily shortened or lengthened as needed using regular speaker or zip wire. Circuit is reversable for proper switch operation with your model, and strobe has 2 blink modes, a 1HTz single-blink mode that is scale for many planes, and a quick double-blink mode standard for many others.
Instructions are included for easy installation and use.
Weight: 60 grams
