These 3-wire, flat servo cables come with a male servo connector intalled on one end, and bare wires that are stripped and "tinned" on the other end. We use these in the production of many of our custom circuits, but they are also useful to modelers who are building thier own RC projects. They are also perfect for attaching LEDs or other devices that come with "pigtails" to a receiver or other circuit.
These area avilable in three sizes:
- 12" long / 26AWG wire
- 6" long / 22AWG wire
- 12" long / 22AWG wire
Use the drop-down menu in the upper right-hand corner to selct the size you need.
Servo Cable-Male to Tinned (bare) Ends
These cable come with "male" servo connectors. The male connector is the larger of the two servo connectors, and is the end that has 3 pins inside the plastic sheath. The connections on a receiver are "male", as are the connectors into which a servo would plug. Contrary to what some modelers believe, the "gender" of an electrical connector is always determined by the metal part of the connector, not by the outer plastic covering or shroud. For this reason, any connector (including battery connectors, servo connectors, etc.) that has a "pin" or a "plug" that protrudes into the other connector is considered the "male" connector. Conversly, any connector that has a "barrel" or a "socket" into which the pins of the other connector fit is considered the "female" connector.
